LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Prius PHV >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Starter >> Smart Key System (Keyless Start) (Diagnostics - Introduction) (PHV) >> SMART KEY SYSTEM (for Start Function) >> DTC Check / Clear >> DTC Check / Clear
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
    5. Read the DTC by following the prompts on the Techstream screen.

      HINT: 

      Refer to the Techstream operator's service information for further details.

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
    5. Clear the DTCs by following the directions on the Techstream screen.

      HINT: 

      Refer to the Techstream operator's service information for further details.