How To Proceed With Troubleshooting
WARNING: This page is about a different car, the 2010 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- VEHICLE BROUGHT TO WORKSHOP
NEXT: Go to next step
- CUSTOMER PROBLEM ANALYSIS. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
NEXT: Go to next step
- PASSENGER AIRBAG ON/OFF INDICATOR CHECK. Refer to DIAGNOSIS SYSTEM
NEXT: Go to next step
- DTCs CHECK (Present and Past DTCs). Refer to DTC CHECK / CLEAR
- Check for DTCs.
Result
Result Proceed to DTC is output. A DTC is not output. B B → GO TO PROBLEM SYMPTOMS TABLE .
A: Go to next step
- Check for DTCs.
- DTCs CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART
NEXT: Go to next step
- CIRCUIT INSPECTION
NEXT: Go to next step
- REPAIR OR REPLACEMENT
NEXT: Go to next step
- DTC CLEARANCE (Present and Past DTCs). Refer to DTC CHECK / CLEAR
- Clear the DTCs.
NEXT: Go to next step
- Clear the DTCs.
- DTC CHECK (Present and Past DTCs). Refer to DTC CHECK / CLEAR
- Check for DTCs.
Result
Result Proceed to DTC is not output. A DTC is output. B B → Go to 5 .
A: Go to next step
- Check for DTCs.
- SYMPTOM SIMULATION. Refer to DIAGNOSIS SYSTEM
- Check the passenger airbag ON/OFF indicator condition.
Result
Result Proceed to Passenger airbag ON/OFF indicator is operating normally. A Passenger airbag ON/OFF indicator (OFF) and SRS warning light come on. B B → Go to 5 .
A: Go to next step
- Check the passenger airbag ON/OFF indicator condition.
- CONFIRMATION TEST
NEXT → END