LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Prius PHV >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Brake Control System (Service Information)) >> VSC Off Switch >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VSC Off Switch: Installation: Installation

WARNING: This page is about a different car, the 2010 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL VSC OFF SWITCH 
    1. Attach the 2 claws to install the VSC off switch.
      Fig 1: Identifying VSC Off Switch, Connector & Claws
      GTY181955Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the VSC off switch connector.
  2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY  . Refer toINSTALLATION - Step 36
  3. INSTALL FRONT CONSOLE BOX  . Refer toINSTALLATION - Step 38
  4. INSTALL BOX BOTTOM MAT  . Refer toINSTALLATION - Step 39
  5. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY  . Refer toINSTALLATION - Step 40
  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)  . Refer toINSTALLATION - Step 41
  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)  . Refer toINSTALLATION - Step 42
  8. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY  . Refer toINSTALLATION - Step 43
scientia non olet · About LEMON Manuals