LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Prius PHV >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 111 (Smart Key System (Start Function) (Diagnostic Codes & Circuit Tests) (Except PHV)) >> SMART KEY SYSTEM (for Start Function) >> DTC B2271: Ignition Hold Monitor Malfunction >> Inspection Procedure >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure: Notes

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • When the power management control ECU is replaced with a new one and the cable from the negative (-) auxiliary battery terminal is connected, the power source mode becomes on (IG) mode. When the auxiliary battery is removed and reinstalled, the power source mode that was selected when the auxiliary battery was removed is restored.
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.
scientia non olet · About LEMON Manuals