How To Proceed With Troubleshooting

*: Use Techstream.

1. Vehicle Brought to Workshop 

   : Go to next step 

2. Check and Clear DTCs and Freeze Frame Data* 

   HINT: 

   Refer to DTC CHECK / CLEAR  and, Refer to FREEZE FRAME DATA .

   : Go to next step 

3. Problem Symptom Confirmation 

   → Symptom does not occur: Go to step   5 

   → Symptom occurs: Go to step   6 

4. Symptom Simulation 

   : Go to next step 

5. DTC Check* 

   HINT: 

   Refer to DTC CHECK / CLEAR .

   → There is no output: Go to step   7 

   → There is output: Go to step   8 

6. Problem Symptoms Table 

   HINT: 

   Refer to PROBLEM SYMPTOMS TABLE .

   → Check for fluid leakage and Go to step   10 

7. DTC Chart 

   HINT: 

   Refer to DIAGNOSTIC TROUBLE CODE CHART .

   : Go to next step 

8. Circuit Inspection* 

   : Go to next step 

9. Identification of Problem 

   : Go to next step 

10. Repair 

    : Go to next step 

11. Confirmation Test* 

    → End