LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System (W/O Jam Protection Function) (Diagnostics & Symptom Tests) >> POWER WINDOW CONTROL SYSTEM (W/O Jam Protection Function) >> Symptom Tests >> Key-off Operation Function Operates even if Operating Conditions are not Satisfied >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key-off Operation Function Operates even if Operating Conditions are not Satisfied: Procedure

  1. CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION SWITCH OFF 
    1. Check the power window operation function after the ignition switch is turned OFF.
      RESULT:

      Result Proceed to
      Front side door is opened within 43 +/-1.5 seconds but power window can still operate A
      43 +/-1.5 seconds pass and power windows can still operate B

    B → REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK) 

    A: Go to next step 

  2. READ VALUE USING TECHSTREAM (DOOR COURTESY SWITCH) 
    1. Use the Data List to check if the main body ECU is functioning properly.
      MAIN BODY:

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D Door Courtesy SW Driver side door courtesy switch signal / ON or OFF ON: Driver door open
      OFF: Driver door closed
      -
      P Door Courtesy SW Front passenger side door courtesy switch signal / ON or OFF ON: Front passenger door open
      OFF: Front passenger door closed
      -

      OK

      Tester display changes normally when door courtesy switch is operated.

    OK → REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK) 

    NG → Go to next step 

  3. GO TO LIGHTING SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING