LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2011 >> 4Runner Trail >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can Communication System (Diagnostic Codes & Circuit Tests) >> Can Communication System >> Circuit Tests >> Navigation Receiver Assembly Communication Stop Mode >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Navigation Receiver Assembly Communication Stop Mode: Description

Detection Item Symptom Trouble Area
Navigation Receiver Communication Stop Mode Either condition is met:
  • "AVN1" is not displayed on the "Bus Check" screen.
  • "Navigation Receiver Communication Stop Mode" in "DTC Combination Table" applies.
  • Power source or inside navigation receiver assembly
  • Navigation receiver branch wire or connector
  • Navigation Receiver Assembly

HINT: 

For vehicles with a navigation system only.

scientia non olet · About LEMON Manuals