LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2011 >> Avalon Base >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake Control System (Service Information) >> VSC Off Switch >> Inspection >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VSC Off Switch: Inspection: Inspection

  1. INSPECT VSC OFF SWITCH 
    1. Disconnect the VSC OFF switch connector.
    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      6 (+) - 3 (E) Switch is pushed in Below 1 Ω
      6 (+) - 3 (E) Switch is not pushed in 10 kΩ or higher
      Fig 1: Inspecting VSC OFF Switch
      GTY182296Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the value is not as specified, replace the VSC OFF switch.