Typical Enabling Conditions
ALL:
| Monitor runs whenever following DTCs are not present | None |
ECT SENSOR COLD START MONITOR:
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| ECT at engine start | Less than 60°C (140°F) |
| ECT sensor circuit (P0115, P0117, P0118, P0125) | Not detected |
| IAT sensor circuit (P0112, P0113) | Not detected |
| Soak time | 0 second or more |
| Accumulated MAF | 1241.06 g or more |
| Fuel cut | OFF |
| Difference between ECT at engine start and IAT | Less than 40°C (72°F) |
ECT SENSOR SOAK MONITOR:
| Battery voltage | 10.5 V or more |
| Engine | Running |
| ECT sensor circuit fail (P0115, P0117, P0118, P0125) | Not detected |
| IAT sensor circuit fail (P0112, P0113) | Not detected |
| Soak time | 5 hours or more |
| Either of the following conditions is met: | A or B |
| A. ECT at engine start | 60°C (140°F) or more |
| B. Accumulated MAF | 2333.98 g or more |