LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2011 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Crankshaft Position Sensor >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Removal: Removal

  1. REMOVE GENERATOR ASSEMBLY 
    1. Remove the generator. Refer to REMOVAL .
  2. SEPARATE COOLER COMPRESSOR ASSEMBLY  . Refer to REMOVAL - Step 18
  3. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the sensor connector.
      Fig 1: Locating Crankshaft Position Sensor And Fastener
      GTY173102Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals