Occupant Classification System

SUPPLEMENTAL RESTRAINT SYSTEM: OCCUPANT CLASSIFICATION SYSTEM: PRECAUTION

NOTICE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.





1. INSPECTION PROCEDURE FOR VEHICLE INVOLVED IN ACCIDENT

(a) Perform zero point calibration and sensitivity check if any of the following conditions occur:

The occupant classification ECU is replaced.

Accessories (seatback tray and seat cover, etc.) are installed.

The front passenger seat is removed from the vehicle.

The passenger airbag ON/OFF indicator ("OFF") comes on when the front passenger seat is not occupied.

The vehicle is brought to the workshop for repair due to an accident or a collision.

2. EXPRESSIONS OF IGNITION SWITCH

The type of ignition switch used on this model differs according to the specifications of the vehicle.

The expressions listed in the table below are used in this section.