LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2011 >> Matrix Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) >> Cruise Control Main Switch >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Main Switch: Installation: Installation

  1. INSTALL CRUISE CONTROL MAIN SWITCH 
    1. Engage the pin and install the cruise control main switch as shown in the illustration.
      Fig 1: Installing Cruise Control Main Switch
      GTY247032Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
    3. Install the 2 screws.
      Fig 2: Remove/Install Cruise Control Main Switch Screws
      GTY247033Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL STEERING PAD  . Refer to INSTALLATION - Step 1
  3. INSTALL LOWER NO. 3 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 2
  4. INSTALL LOWER NO. 2 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 3
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. INSPECT STEERING PAD  . Refer to INSTALLATION - Step 5
  7. INSPECT SRS WARNING LIGHT 
    1. Inspect the SRS warning light. Refer to DIAGNOSIS SYSTEM .
scientia non olet · About LEMON Manuals