LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2011 >> Matrix Base, Automatic >> Repair and Diagnosis (Single Page) >> External Pages >> Different variant/trim >> Section 14 (Engine Control System (2AZ-FE) (Service Information)) >> Knock Sensor >> Inspection >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor: Inspection: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT KNOCK SENSOR 
    1. Measure the resistance.
      Fig 1: Inspecting Knock Sensor Using Ohmmeter
      GTY134485Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 120 to 280 kΩ

      If the result is not as specified, replace the knock sensor.

scientia non olet · About LEMON Manuals