| Monitor runs whenever following DTCs not present |
None |
| EVAP key-off monitor runs when all of following conditions are met |
- |
| Atmospheric pressure |
70 to 110 kPa-a (525 to 825 mmHg-a) |
| Battery voltage |
10.5 V or more |
| Vehicle speed |
Below 2.5 mph (4 km/h) |
| Ignition switch |
OFF |
| Time after key off |
5, 7 or 9.5 hours |
| Canister pressure sensor malfunction (P0452 and P0453) |
Not detected |
| Purge VSV |
Not operated by scan tool |
| Vent valve |
Not operated by scan tool |
| Leak detection pump |
Not operated by scan tool |
| Both of following conditions are met before key off |
Conditions 1 and 2 |
| 1. Duration that vehicle driven |
5 minutes or more |
| 2. EVAP purge operation |
Performed |
| Engine coolant temperature |
4.4 to 35°C (40 to 95°F) |
| Intake air temperature |
4.4 to 35°C (40 to 95°F) |