Data List / Active Test
WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- DATA LIST
HINT:
Using Techstream's DATA LIST allows the status of a switch, sensor, actuator and other items to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect Techstream to the DLC3.
- Turn the ignition switch on (IG).
- Read the DATA LIST.DRIVER SEAT:
Tester Display Measurement Item/Range Normal Condition Diagnostic note Reclining Rear Reclining switch signal (Rearward)/ ON or OFF ON: Reclining switch (Rearward) is ON
OFF: Reclining switch (Rearward) is OFF- Reclining Front Reclining switch signal (Forward)/ ON or OFF ON: Reclining switch (Forward) is ON
OFF: Reclining switch (Forward) is OFF- Front Vertical Down Front vertical switch signal (Downward)/ ON or OFF ON: Front vertical switch (Downward) is ON
OFF: Front vertical switch (Downward) is OFF- Front Vertical Up Front vertical switch signal (Upward)/ ON or OFF ON: Front vertical switch (Upward) is ON
OFF: Front vertical switch (Upward) is OFF- Lifter Switch Down Lifter switch signal (Downward)/ ON or OFF ON: Lifter switch (Downward) is ON
OFF: Lifter switch (Downward) is OFF- Lifter Switch Up Lifter switch signal (Upward)/ ON or OFF ON: Lifter switch (Upward) is ON
OFF: Lifter switch (Upward) is OFF- Slide Rear Sliding switch signal (Rearward)/ ON or OFF ON: Sliding switch (Rearward) is ON
OFF: Sliding switch (Rearward) is OFF- Slide Front Sliding switch signal (Forward)/ ON or OFF ON: Sliding switch (Forward) is ON
OFF: Sliding switch (Forward) is OFF- Power Voltage Power supply for driver seat ECU & switch/ MIN: 0 V, MAX: 19.89 V Within range from 11 to 14 V - Ignition Switch Ignition switch status (IG)/ ON or OFF ON: Ignition switch is ON
OFF: Ignition switch is OFF- KSW Switch Key detection signal/ ON or OFF ON: Key is in the vicinity of the driver's seat
OFF: Key is not in the vicinity of the driver's side- DCTY Switch Door courtesy switch signal/ ON or OFF ON: Driver side door is open
OFF: Driver side door is closed- P Switch Shift lever position P signal/ ON or OFF ON: Shift lever in P position
OFF: Shift lever in any position except P- Key Code Confirm Recognition code is registered/ ON or OFF ON: One or more recognition codes are registered
OFF: No recognition code is registered- M2 Switch Seat memory switch M2 signal/ ON or OFF ON: Seat memory switch M2 is ON
OFF: Seat memory switch M2 is OFF- M1 Switch Seat memory switch M1 signal/ ON or OFF ON: Seat memory switch M1 is ON
OFF: Seat memory switch M1 is OFF- SET Switch Seat memory set switch signal/ ON or OFF ON: Memory set switch is ON
OFF: Memory set switch is OFF- Slide Position Seat sliding position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - Reclining Position Seatback position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - Front Vertical Position Seat front vertical position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - Lifter position Seat lifter position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - Memory No1 Driving position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- Memory No2 Driving position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- Seat Memory No. 1 Seat position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- Seat Memory No. 2 Seat position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- Slide Pos Mem No. 1 Seat sliding position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - Reclining Pos Mem No. 1 Seatback position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - Front Vrtcl Pos Mem No. 1 Front vertical position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - Lifter Pos Mem No. 1 Lifter position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - Slide Pos Mem No. 2 Seat sliding position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - Reclining Pos Mem No. 2 Seatback position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - Front Vrtcl Pos Mem No. 2 Front vertical position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - Lifter Pos Mem No. 2 Lifter position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 -
- ACTIVE TEST
HINT:
Using Techstream's ACTIVE TEST allows the relay, VSV, actuator, and other items to be operated without removing any parts. Reading the ACTIVE TEST early in troubleshooting is one way to save time.
The DATA LIST can be displayed during the ACTIVE TEST.
- Connect Techstream to the DLC3.
- Turn the ignition switch on (IG).
- Perform the ACTIVE TEST by following the directions on the tester screen.DRIVER SEAT:
Tester Display Test Part Control Range Diagnostic Note Seat Reclining Test detail: reclining operation FRONT/REAR Front / Rear Vehicle condition: stopped Front Vertical Operation Test detail: front vertical operation UP/DOWN Up / Down Vehicle condition: stopped Lifter Operation Test detail: lifter operation UP/DOWN Up / Down Vehicle condition: stopped Seat Slide Operation Test detail: sliding operation UP/DOWN Up / Down Vehicle condition: stopped