Starter Relay Circuit (TO 12/2010): Procedure

WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC OUTPUT
1. Delete the DTCs. Refer to DTC CHECK / CLEAR .
2. Check for DTCs again.
  HINT:
  
  If the engine does not start, check for DTC B2273, B2275, B2278, B2284, B2285, B2287, B2288 and B2289. (For details, see the "DTC check and clear". Refer to DTC CHECK / CLEAR .)
  
  OK
  
  No DTC is output.
NG → GO TO DTC CHECK / CLEAR DTC CHART

OK → GO TO CRANKING HOLDING FUNCTION CIRCUIT CRANKING HOLDING FUNCTION CIRCUIT