Removal (To 12/2010): Removal

WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL . Refer to REMOVAL - Step 10
REMOVE INTEGRATION CONTROL AND PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) Refer to step 2
REMOVE INTEGRATION CONTROL AND PANEL WITH NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System) . Refer to REMOVAL - Step 2
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY . Refer to REMOVAL - Step 32
REMOVE POSITION INDICATOR HOUSING ASSEMBLY . Refer to REMOVAL - Step 33
REMOVE SEAT HEATER SWITCH (w/ Seat Heater System) . Refer to REMOVAL - Step 34
REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY . Refer to REMOVAL - Step 35
REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY
1. Disengage the clamp.
  
  Fig 1: Locating Multi-Media Interface ECU Assembly Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the 3 connectors.
  
  Fig 2: Locating Multi-Media Interface ECU Assembly Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 nuts.
  
  Fig 3: Locating Multi-Media Interface ECU Assembly Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disengage the guide and remove the multi-media interface ECU assembly as shown in the illustration.
  
  Fig 4: Removing Multi-Media Interface ECU Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002