Installation (To 12/2010): Installation

WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL TRANSPONDER KEY ECU ASSEMBLY
1. Connect the connector.
  
  Fig 1: Identifying ECU Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 3 claws and install the transponder key ECU assembly.
  NOTE:
  Be careful when installing the transponder key ECU assembly. If the transponder key ECU assembly is dropped, replace it with a new one.
INSTALL AIR CONDITIONER UNIT ASSEMBLY
HINT:

Refer to the procedure from Install Air Conditioner Unit Assembly. Refer to INSTALLATION .
REGISTER ECU COMMUNICATION ID
NOTE:
When replacing the transponder key ECU assembly, perform initialization. Refer to REGISTRATION .
REGISTER KEY
NOTE:
When replacing the transponder key ECU assembly, perform initialization. Refer to REGISTRATION .