Door Control Switch: Inspection: Inspection

WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT DOOR CONTROL SWITCH (MULTIPLEX NETWORK MASTER SWITCH) (for Driver Side)

Measure the resistance of the multiplex network master switch.

Fig 1: Identifying Door Control Switch Assembly (Driver Side)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Resistance

Tester Connection	Switch Condition	Specified Condition
4 - 2	Locked	Below 1 Ω
4 - 2 2 - 14	OFF	10 kΩ or higher
2 - 14	Unlocked	Below 1 Ω

If the result is not as specified, replace the multiplex network master switch assembly.

INSPECT DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side)

Measure the resistance of the door control switch.

Fig 2: Inspect Door Control Switch Assembly (Front Passenger Side)

Resistance

Tester Connection	Switch Condition	Specified Condition
2 - 3	Locked	Below 1 Ω
2 - 3 1 - 2	OFF	10 kΩ or higher
1 - 2	Unlocked	Below 1 Ω

If the result is not as specified, replace the door control switch assembly.