LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2011 >> Prius >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostic Codes) >> SFI System >> DTC P0106: Manifold Absolute Pressure / Barometric Pressure Circuit Range / Performance Problem >> Typical Enabling Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Typical Enabling Conditions

Monitor runs whenever following DTCs are not present P0010 (Camshaft timing oil control valve assembly bank 1)
P0011 (VVT system bank 1 - advance)
P0012 (VVT system bank 1 - retard)
P0016 (VVT system bank 1 - misalignment)
P0107, P0108 (Manifold absolute pressure)
P0112, P0113 (Intake air temperature sensor)
P0115, P0117, P0118 (Engine coolant temperature sensor)
P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135 (Throttle position sensor)
P0125 (Insufficient coolant temperature for closed loop fuel control)
P0335 (Crankshaft position sensor)
P0401 (EGR system (closed))
P106A (Evaporative emission control system pressure sensor - manifold pressure sensor correlation)
Battery voltage 10.5 V or more
Engine coolant temperature 30°C (86°F) or more
Intake air temperature -10°C (14°F) or more
Engine speed 1000 RPM or more
Throttle position Less than 2°
EGR active open for repair Not activated
EGR duty 20 steps or less
Atmospheric pressure 76 kPa (570 mmHg) or more