DTC 01-DD: Master Reset; DTC 01-E1: Voice Processing Device ON Error: Description
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| 01-DD (*1) | Device that should be master has been disconnected after engine start |
|
| 01-E1 (*2) | AMP device records that AMP output does not function even while the source device operates |
HINT:
- *1: This code may be stored if the engine is started and the ignition switch is turned to the START position again.
- *2: Even if no failure is detected, a trouble code may be recorded depending on the battery condition or engine start voltage.
NOTE:
- Before starting troubleshooting, be sure to clear DTCs to erase codes stored due to the reasons described in the HINT above. Then, check for DTCs and troubleshoot according to the output DTCs.
- The radio receiver is the master unit.
- Be sure to clear and recheck DTCs after the inspection is completed to confirm that no DTCs are output.