Typical Enabling Conditions
| The monitor will run whenever this DTC is not present | P0705: Park/neutral position switch circuit P0746, P0748: Shift solenoid SL1 P0776, P0778: Shift solenoid SL2 P0766, P0982, P0983: Shift solenoid S4 |
| Shift change | Shift change is completed before starting next shift change operation |
| ECM selected gear | 2nd, 3rd or 4th |
| Output shaft rpm | 1,000 rpm or more |
| NSW switch | OFF |
| R switch | OFF |
| L switch | OFF |
| Engine | Running |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |