Jam Protection Function does not Operate: Procedure

PERFORM INITIALIZATION
1. Initialize the power window regulator motor. Refer to INITIALIZATION .
2. Check if the power window auto up/down function operates. Refer to OPERATION CHECK .
  OK
  
  Auto up/down function operates.
NG → See step 3

OK: Go to next step
CHECK JAM PROTECTION FUNCTION OPERATING RANGE
1. Check if the jam protection function operates for applicable power window.
  HINT:
  
  The jam protection function does not operate between the fully closed position of the door glass and the position 4 mm (0.157 in.) below that.
  
  OK
  
  Jam protection function operates.
NG → See step 4

OK → END
GO TO OTHER PROBLEM. Refer to PROBLEM SYMPTOMS TABLE
REPLACE POWER WINDOW REGULATOR MOTOR (APPLICABLE MOTOR). Refer to REMOVAL