April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

HINT:

The following items can be customized.

NOTE:

After confirming whether items requested by the customer are applicable or not for customization, perform customize operations.
Be sure to record the current settings before customizing.
When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization.

MAIN BODY ECU (Using Techstream):

Connect Techstream to the DLC3.
Turn the ignition switch on (IG).
Turn the tester on.
Enter the following menus: Customize Setting / Door Lock.

Select setting by referring to the table below

Tester Display	Default	Contents	Setting
Auto Lock	OFF	Function that locks the doors once when the vehicle speed reaches a certain level.	ON/OFF
Unlock Key Twice	ON	Functions that unlocks only driver side door when driver side door key cylinder is turned to unlock once and unlocks all the doors when it is turned to unlock twice. In OFF setting, turning it once unlocks all doors.	ON/OFF
All Unlock/Open-Close	ON	Function that unlocks all doors when opening driver door within 10 seconds after turning the ignition switch on (IG)	ON/OFF
Unlock/Park	OFF	Function that unlocks doors when lever is shifted to P position from any position other than P while the ignition switch is ON.	ON/OFF

MANUAL SETTING (Switch operation)
1. Close all the doors.
2. Turn the ignition switch on (IG).
3. Within ten seconds after the ignition switch on (IG).
  - To set function (Shift-linked Automatic Door Lock)
    Push and hold the LOCK side of the power door lock switch for five seconds with the shift lever in the P.
  - To set function (Speed-sensitive Automatic Door Lock)
    Push and hold the LOCK side of the power door lock switch for five seconds with the shift lever in any position except P.
  - To set function (Shift-linked Automatic Door Unlock)
    Push and hold the UNLOCK side of the power door lock switch for five seconds with the shift lever in the P.
  - To set function (Opening Driver's Door-linked Automatic Door Unlock)
    Push and hold the UNLOCK side of the power door lock switch for five seconds with the shift lever in any position except P.
  If user wants to cancel a function, repeat the procedure. Each time user perform the procedure, the function is set or cancelled.