Customize Parameters
WARNING: This page is about a different variant/trim than selected.
- CUSTOMIZE POWER WINDOW CONTROL SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function(s) can be customized.
- Be sure to make notes of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the power switch to on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Power Window.
- Select the setting by referring to the table below.
Display Default Content Setting Relevant ECU Door Key P/W Up OFF This function is used to close the windows by operating the mechanical key. OFF/ON Main body ECU (Multiplex network body ECU) Door Key P/W Down OFF This function is used to open the windows by operating the mechanical key. OFF/ON Main body ECU (Multiplex network body ECU) P/W Down W/ Transmit* OFF This function is used to open the windows using the wireless key transmitter. OFF/ON Main body ECU (Multiplex network body ECU) - *: w/ Daytime Running Light Control
- Enter the following menus: Customize Setting / Wireless Door Lock.
- Select the setting by referring to the table below.
Display Default Content Setting Relevant ECU P/W Ope buzzer* ON This function turns the wireless power window buzzer response on or off. OFF/ON Main body ECU (Multiplex network body ECU) - *: w/ Daytime Running Light Control