How To Proceed With Troubleshooting

HINT: 

• The anti-lock brake system troubleshooting procedures are based on the premise that the CAN communication system is normally functioning. Check the CAN communication system first before troubleshooting the anti-lock brake system. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
• *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT: Go to next step 

2. CUSTOMER PROBLEM ANALYSIS 
   1. Interview the customer and confirm the problem. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .

      NEXT: Go to next step 

3. CHECK DTC AND FREEZE FRAME DATA* 
   1. Check and record DTCs and Freeze Frame Data.
   2. Clear the DTCs and Freeze Frame Data. Refer to DTC CHECK / CLEAR  for DTC Check/Clear, and. Refer to FREEZE FRAME DATA  for Freeze Frame Data).
   3. Reconfirm the DTCs.
      1. Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data. Refer to DTC CHECK / CLEAR  for DTC Check/Clear, and. Refer to FREEZE FRAME DATA  for Freeze Frame Data).

         Result

         Result	Proceed to
         DTC is output	A
         DTC is not output (Problem symptom does not occur)	B
         DTC is not output (Problem symptom occurs)	C

      B → GO TO   5 

      C → GO TO   6 

      A: Go to next step 

4. DIAGNOSTIC TROUBLE CODE CHART 
   1. Proceed to Diagnostic Trouble Code Chart. Refer to DIAGNOSTIC TROUBLE CODE CHART .

      NEXT → GO TO   7 

5. SYMPTOM SIMULATION 
   1. Proceed to Diagnosis System. Refer to DIAGNOSIS SYSTEM .

      NEXT: Go to next step 

6. PROBLEM SYMPTOMS TABLE 
   1. Proceed to Problem Symptoms Table. Refer to PROBLEM SYMPTOMS TABLE .

      NEXT: Go to next step 

7. CIRCUIT INSPECTION* 

   NEXT: Go to next step 

8. IDENTIFICATION OF PROBLEM 

   NEXT: Go to next step 

9. REPAIR OR REPLACEMENT 

   NEXT: Go to next step 

10. CONFIRMATION TEST* 

    NEXT → END