Installation

2AZ-FE STARTING: IGNITION SWITCH: INSTALLATION

1. INSTALL IGNITION SWITCH ASSEMBLY

(a) Install the ignition switch with the 2 screws.





(b) Connect the connector.





2. INSTALL UPPER STEERING COLUMN COVER Installation

3. INSTALL LOWER STEERING COLUMN COVER Installation

4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

5. ADJUST SPIRAL CABLE Installation

6. INSTALL STEERING WHEEL ASSEMBLY

HINT
Installation.

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

HINT
Installation.

8. INSPECT STEERING PAD Installation

9. INSPECT SRS WARNING LIGHT

HINT
Diagnosis System.