Accelerator Pedal: Installation: Installation

WARNING: This page is about a different car, the 2012 Lexus GX 460. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ACCELERATOR PEDAL POSITION SENSOR ASSEMBLY
NOTE:
- Avoid physical shocks to the accelerator pedal position sensor.
- Do not disassemble the accelerator pedal position sensor.
1. Install the accelerator pedal position sensor with the 2 nuts.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
2. Connect the accelerator pedal position sensor connector.
INSTALL FRONT NO. 1 CONSOLE BOX INSERT . Refer to INSTALLATION - Step 9