April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Speed Sensor: Installation: Installation

INSTALL FRONT SPEED SENSOR
1. Install the front speed sensor with the bolt.
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
  
  NOTE:
  Make sure that the sensor tip is clean.
2. Connect the skid control sensor connector.
INSTALL FRONT WHEEL
Torque: 112 N*m (1137 kgf*cm, 82 ft.*lbf)
CHECK VSC SENSOR SIGNAL
Refer to TEST MODE PROCEDURE