Cruise Control Main Switch: Installation: Installation

INSTALL CRUISE CONTROL MAIN SWITCH
1. Install the cruise control main switch with the 2 screws.
  
  Fig 1: Identifying Cruise Control Main Switch And Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf)
2. Connect the connector.
INSTALL STEERING PAD . Refer to INSTALLATION - Step 2
INSTALL NO. 3 LOWER STEERING WHEEL COVER . Refer to INSTALLATION - Step 3
INSTALL NO. 2 LOWER STEERING WHEEL COVER . Refer to INSTALLATION - Step 4
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
INSPECT SRS WARNING LIGHT
Refer to DIAGNOSIS SYSTEM