How To Proceed With Troubleshooting

HINT: 

*: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT: Go to next step 

2. CUSTOMER PROBLEM ANALYSIS 

   NEXT: Go to next step 

3. PASSENGER AIRBAG ON/OFF INDICATOR CHECK 

   NEXT: Go to next step 

4. CHECK DTC (Present and Past DTCs)* 
   1. Check for DTCs. Refer to DTC CHECK / CLEAR .

      Result

      Result	Proceed to
      DTC is output.	A
      DTC is not output.	B

      B → GO TO PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE  

      A: Go to next step 

5. DTC CHART 

   NEXT: Go to next step 

6. CIRCUIT INSPECTION* 

   NEXT: Go to next step 

7. REPAIR 

   NEXT: Go to next step 

8. CLEAR DTCS (Present and Past DTCs)* 
   1. Clear the DTCs. Refer to DTC CHECK / CLEAR .

      NEXT: Go to next step 

9. CHECK DTC (Present and Past DTCs)* 
   1. Check for DTCs. Refer to DTC CHECK / CLEAR .

      Result

      Result	Proceed to
      DTC is not output.	A
      DTC is output.	B

      B → Go to step 5 

      A: Go to next step 

10. SYMPTOM SIMULATION 
    1. Check the passenger airbag ON/OFF indicator condition.

       Result

       Result	Proceed to
       Passenger airbag ON/OFF indicator is operating normally.	A
       Passenger airbag ON/OFF indicator ("OFF") and SRS warning light come on.	B

       B → Go to step 5 

       A: Go to next step 

11. CONFIRMATION TEST 

    NEXT → END