CD cannot be Ejected: Procedure
- PRESS "EJECT" AND CHECK OPERATION
- Press the eject switch of the radio receiver assembly for 2 seconds or more and check that the CD is ejected.
OK
CD is ejected.
NG → See step 3
OK: Go to next step
- Press the eject switch of the radio receiver assembly for 2 seconds or more and check that the CD is ejected.
- REPLACE CD AND RECHECK
- Replace the CD with a known good one and recheck.
OK
CD is ejected.
NG → See step 3
OK → END
- Replace the CD with a known good one and recheck.
- REPLACE RADIO RECEIVER ASSEMBLY. Refer to REMOVAL