DTC P0505: Idle Control System Malfunction: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read the DTCs.

   Result

   Result	Proceed to
   DTC P0505 is output	A
   DTC P0505 and other DTCs are output	B

   HINT: 

   If any DTCs other than P0505 are output, troubleshoot those DTCs first.

B → See step   6 

A: Go to next step 

1. Check the PCV hose connections. Refer to COMPONENTS .

   OK

   PCV hose is connected correctly and is not damaged.

NG → REPAIR OR REPLACE PCV HOSE 

OK: Go to next step 

1. Check the intake system for vacuum leaks. Refer to ON-VEHICLE INSPECTION .

   OK

   No leaks in intake system.

NG → REPAIR OR REPLACE INTAKE SYSTEM 

OK: Go to next step 

1. Check the throttle valve condition.

   OK

   Throttle valve is not contaminated with foreign objects and moves smoothly.

NG → See step   7 

OK: Go to next step 

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Clear the DTCs.
5. Turn the ignition switch off and wait for at least 30 seconds.
6. Turn the ignition switch to ON.
7. Turn the Techstream on.
8. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
9. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
10. Read the DTCs.
    RESULT
    
    

    Result	Proceed to
    DTC P0505 is output	A
    DTC is not output	B

B → END 

A → See step   8