Clutch Switch: Installation: Installation

WARNING: This page is about a different car, the 2011 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CLUTCH SWITCH (CRUISE CONTROL CANCEL SWITCH ASSEMBLY)
1. Temporarily install the clutch switch (cruise control cancel switch assembly) with the nut.
  
  Fig 1: View Of Clutch Switch Connector And Pin
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the pin and tighten the nut.
  Torque: 16 N*m (160 kgf*cm, 12 ft.*lbf)
3. Connect the connector.