Integration Relay: Removal: Removal

WARNING: This page is about a different car, the 2012 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE NO. 1 RELAY BLOCK COVER
REMOVE INTEGRATION NO. 1 RELAY
1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the integration relay.
  
  Fig 1: Removing Integration Relay
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the 3 connectors.
  
  Fig 2: Locating Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002