LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Matrix Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 336 (Navigation System (Service Information)) >> Navigation Antenna >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Navigation Antenna: Installation: Installation

WARNING: This page is about a different car, the 2012 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NAVIGATION ANTENNA ASSEMBLY (except TMC Made) 
    1. Install the navigation antenna assembly with the 3 screws.
    2. Engage the 2 clamps.
  2. INSTALL NAVIGATION ANTENNA ASSEMBLY (for TMC Made) 
    1. Install the navigation antenna assembly with the 2 screws.
    2. Engage the 3 clamps.
  3. INSTALL NO. 4 INSTRUMENT PANEL CUSHION (for TMC Made)  . Refer to REASSEMBLY - Step 14
  4. INSTALL NO. 3 INSTRUMENT PANEL CUSHION (for TMC Made)  . Refer to REASSEMBLY - Step 15
  5. INSTALL NO. 2 INSTRUMENT PANEL CUSHION (for TMC Made)  . Refer to REASSEMBLY - Step 16
  6. INSTALL NO. 2 INSTRUMENT PANEL CUSHION (except TMC Made)  . Refer to REASSEMBLY - Step 17
  7. INSTALL NO. 3 HEATER TO REGISTER DUCT  . Refer to REASSEMBLY - Step 18
  8. INSTALL NO. 1 HEATER TO REGISTER DUCT  . Refer to REASSEMBLY - Step 19
  9. INSTALL NO. 2 HEATER TO REGISTER DUCT  . Refer to REASSEMBLY - Step 20
  10. INSTALL DEFROSTER NOZZLE ASSEMBLY  . Refer to REASSEMBLY - Step 21
  11. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to INSTALLATION

scientia non olet · About LEMON Manuals