LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Matrix Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 336 (Navigation System (Service Information)) >> Navigation Receiver >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Navigation Receiver: Installation: Installation

WARNING: This page is about a different car, the 2012 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NAVIGATION RECEIVER ASSEMBLY 
  2. INSTALL NO. 1 RADIO BRACKET 
    1. Install the No. 1 radio bracket with the 4 screws.
  3. INSTALL NO. 2 RADIO BRACKET 
    1. Install the No. 2 radio bracket with the 4 screws.
  4. INSTALL NAVIGATION RECEIVER WITH BRACKET 
    1. Connect each connector.
    2. Engage the 4 clips.
    3. Install the navigation receiver with bracket with the 4 bolts.
  5. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY  . Refer to INSTALLATION - Step 12
  6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  . Refer to INSTALLATION - Step 13
  7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  . Refer to INSTALLATION - Step 14
  8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH  . Refer to INSTALLATION - Step 15
  9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH  . Refer to INSTALLATION - Step 16
  10. INSERT MAP DISC 
scientia non olet · About LEMON Manuals