LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Matrix Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 89 (Audio / Video System (Service Information)) >> Multi-Media Interface Ecu >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multi-Media Interface Ecu: Installation: Installation

WARNING: This page is about a different car, the 2011 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 2 MULTI-MEDIA INTERFACE BRACKET 
    1. Install the No. 2 multi-media interface bracket with the 2 screws.
  2. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET 
    1. Install the No. 1 multi-media interface bracket with the 2 screws.
  3. INSTALL MULTI-MEDIA INTERFACE ECU WITH BRACKET 
    1. Install the multi-media interface ECU with bracket with the 2 bolts.
    2. Connect each connector.
  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 14
  5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY  . Refer to INSTALLATION - Step 7
scientia non olet · About LEMON Manuals