LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Matrix Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> Supplemental Restraint System (Service Information) >> Center Airbag Sensor Assembly >> On-Vehicle Inspection >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION) 
    1. Perform a diagnostic system check. Refer to DTC CHECK / CLEAR .
  2. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) 
    1. Perform a diagnostic system check. Refer to DTC CHECK / CLEAR .
  3. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED) 
    1. Replace the center airbag sensor assembly.
      WARNING:

      Be sure to follow the correct removal and installation procedures for the center airbag sensor assembly.

      HINT: 

      The center airbag sensor assembly should be replaced after any of the airbags has deployed, as it has been subjected to an impact.

scientia non olet · About LEMON Manuals