Inspection Procedure: Procedure
WARNING: This page is about a different car, the 2011 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- CLEAR DTC
- Clear the DTCs. Refer to DTC CHECK / CLEAR .
NEXT: Go to next step
- RE-REGISTER KEY
- Re-register the key. Refer to REGISTRATION .
NEXT: Go to next step
- CHECK ENGINE START
- Check that the engine starts.
OK
The engine starts.
NG → REPLACE KEY
OK → END (KEY REGISTRATION IS DEFECTIVE)
- Check that the engine starts.