Mass Air Flow Meter: Installation: Installation

WARNING: This page is about a different car, the 2011 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL MASS AIR FLOW METER
1. Install the mass air flow meter with the 2 screws.
  
  Fig 1: Remove/Install Mass Air Flow Meter Connector Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 1.0 N*m (10 kgf*cm, 9 in.*lbf)
  
  NOTE:
  Make sure that the O-ring is not cracked or does not jump out of position during installation.
2. Connect the mass air flow meter connector.