LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Matrix Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Can Communication System (Diagnostics & Symptom Tests)) >> Can Communication System >> Symptom Tests >> Check CAN Bus Lines for Short Circuit >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check CAN Bus Lines for Short Circuit: Description

WARNING: This page is about a different car, the 2011 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.

There may be a short circuit in the CAN main wire and/or CAN branch wire when the resistance between terminals 6 (CANH) and 14 (CANL) of the DLC3 is below 54 Ω.

Symptom Trouble Area
Resistance between terminals 6 (CANH) and 14 (CANL) of DLC3 is below 54 Ω. Short in CAN bus wire
  • Skid control ECU
  • Power steering ECU
  • Steering angle sensor
  • Yaw rate sensor
  • ECM
  • Center airbag sensor assembly
  • Air conditioning amplifier
  • Combination meter
  • Main body ECU
  • Accessory gateway
  • CAN No. 1 junction connector
  • CAN No. 2 junction connector
  • 4WD control ECU