How To Proceed With Troubleshooting
WARNING: This page is about a different car, the 2012 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- VEHICLE BROUGHT TO WORKSHOP
NEXT: Go to next step
- CUSTOMER PROBLEM ANALYSIS
NEXT: Go to next step
- CHECK CAN COMMUNICATION SYSTEM
- Check for DTC output. Refer to DIAGNOSIS SYSTEM
.
Result
Result Proceed to No CAN DTC output A CAN DTC output B B → GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
A: Go to next step
- Check for DTC output. Refer to DIAGNOSIS SYSTEM
.
- PROBLEM SYMPTOM CONFIRMATION
NEXT: Go to next step
- SYMPTOM SIMULATION
NEXT: Go to next step
- PROBLEM SYMPTOMS TABLE
- Refer to Problem Symptoms Table. Refer to PROBLEM SYMPTOMS TABLE .
NEXT: Go to next step
- Refer to Problem Symptoms Table. Refer to PROBLEM SYMPTOMS TABLE .
- CIRCUIT INSPECTION
NEXT: Go to next step
- REPAIR OR REPLACE
NEXT: Go to next step
- CONFIRMATION TEST
NEXT → END