Portable Player cannot be Connected Manually/Automatically: Procedure

1. Check if the portable player is registered as a connected device.
   NOTE:

   If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.

   Result

   Result	Proceed to
   The portable player is registered as a connected device.	A
   The portable player is not registered as a connected device.	B

B → REGISTER PORTABLE PLAYER AS CONNECTED DEVICE 

A: Go to next step 

1. Check the connection condition between the portable player and radio receiver assembly.

   HINT: 

   The portable player cannot be connected when any of the following conditions are met: 

   • The portable player is connected to another device.
   • The portable player is connected to the radio receiver assembly using the hands-free function.
   • The radio receiver assembly has cleared the portable player registration.
   • The portable player is off.

   Result

   Result	Proceed to
   The portable player cannot be connected automatically.	A
   The portable player cannot be connected manually.	B

B → See step   4 

A: Go to next step 

1. Check the automatic connection settings for "Bluetooth" audio.
   1. Turn the ignition switch off.
   2. Turn the ignition switch to ACC or ON.

      OK

      The portable player is automatically recognized by the radio receiver assembly.

NG → CHANGE SETTING TO ALLOW PORTABLE PLAYER TO BE RECOGNIZED BY RADIO RECEIVER ASSEMBLY 

OK: Go to next step 

1. Check the status of the portable player.
   1. Check that the portable player is not in standby mode.
   2. Check that the portable player is not connected to another device (headphones etc.).

      OK

      The portable player is not in standby mode and not connected to another device (headphones etc.).

NG → TAKE PORTABLE PLAYER OUT OF STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES etc.) 

OK: Go to next step 

1. Check if the portable player can be connected manually/automatically on another "Bluetooth" audio compatible vehicle of the same model.

   OK

   The portable player can be connected manually/automatically.

NG → PORTABLE PLAYER IS NOT COMPATIBLE 

OK: Go to next step 

1. Remove additional devices which use radio waves.
2. Check if the portable player can be connected manually/automatically.

   OK

   The portable player can be connected manually/automatically.

NG → See step   7 

OK → END