LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Matrix Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio / Video System (Service Information) >> Multi-Media Interface Ecu >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multi-Media Interface Ecu: Installation: Installation

  1. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET RH 
    1. Install the No. 1 multi-media interface bracket RH with the 2 screws.
  2. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET LH 
    1. Install the No. 1 multi-media interface bracket LH with the 2 screws.
  3. INSTALL MULTI-MEDIA INTERFACE ECU WITH BRACKET 
    1. Connect each connector.
    2. Install the multi-media interface ECU with bracket with the 2 nuts.
    3. Engage the No. 8 relay block with the 2 screws.
  4. INSTALL TIRE PRESSURE WARNING ECU  . Refer to INSTALLATION - Step 1
  5. INSTALL AIR CONDITIONING PANEL ASSEMBLY  . Refer to INSTALLATION - Step 1
  6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle)  . Refer to INSTALLATION - Step 5
  7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle)  . Refer to INSTALLATION - Step 6
  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  . Refer to INSTALLATION - Step 7
  9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)  . Refer to INSTALLATION - Step 8
  10. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 17
scientia non olet · About LEMON Manuals