Customize Parameters
- CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Door Lock.
- Select the setting by referring to the table below.MAIN BODY
Tester Display Default Content Setting Unlock Key Twice ON Function that unlocks only driver door when driver door key cylinder is turned to UNLOCK once, and unlocks all doors when it is turned to UNLOCK twice. For OFF setting, turning it once unlocks all doors. ON/OFF Auto Lock/Shift ON Function that locks all doors when shift lever is moved to P from any other position with engine running and all doors closed. ON/OFF Auto Unlock/Shift ON Function that unlocks all doors when shift lever is moved to P from any other position while the ignition switch is ON. ON/OFF All Unlock/Open-Close OFF Function that unlocks all doors when opening driver door within 10 seconds after turning the ignition switch to ON. ON/OFF