How To Proceed With Troubleshooting
WARNING: This page is about a different car, the 2011 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
- Use the following procedure to troubleshoot the lighting system.
- *: Use the Techstream.
- VEHICLE BROUGHT TO WORKSHOP
NEXT: Go to next step
- CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK
NEXT: Go to next step
- INSPECT BATTERY VOLTAGE
Standard voltage
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
NEXT: Go to next step
- PROBLEM SYMPTOMS TABLE
Result
Result Proceed to Fault is not listed in problem symptoms table A Fault is listed in problem symptoms table B B → Go to step 6
A: Go to next step
- OVERALL ANALYSIS AND TROUBLESHOOTING*
- Refer to DATA LIST / ACTIVE TEST
- Refer to TERMINALS OF ECU
NEXT: Go to next step
- ADJUST, REPAIR OR REPLACE
NEXT: Go to next step
- CONFIRMATION TEST
NEXT → END