LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Matrix Base, Standard Trans >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 72 (Cruise Control System (Service Information)) >> Cruise Control Main Switch >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Main Switch: Removal: Removal

WARNING: This page is about a different car, the 2011 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

  2. REMOVE LOWER NO. 3 STEERING WHEEL COVER (w/o Front Spoiler)  . Refer to REMOVAL - Step 3
  3. REMOVE LOWER NO. 3 STEERING WHEEL COVER (w/ Front Spoiler)  . Refer to REMOVAL - Step 4
  4. REMOVE LOWER NO. 2 STEERING WHEEL COVER (w/o Front Spoiler)  . Refer to REMOVAL - Step 5
  5. REMOVE LOWER NO. 2 STEERING WHEEL COVER (w/ Front Spoiler)  . Refer to REMOVAL - Step 6
  6. REMOVE STEERING PAD (w/o Front Spoiler)  . Refer to REMOVAL - Step 7
  7. REMOVE STEERING PAD (w/ Front Spoiler)  . Refer to REMOVAL - Step 8
  8. REMOVE CRUISE CONTROL MAIN SWITCH 
    1. Disconnect the connector.
    2. Remove the 2 screws.
      Fig 1: Locating Cruise Control Main Switch Connector And Screws
      GTY207445Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the switch as shown in the illustration.
      Fig 2: Removing Cruise Control Main Switch
      GTY170549Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals