Engine Coolant Temperature Sensor: Installation: Installation

WARNING: This page is about a different car, the 2011 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ENGINE COOLANT TEMPERATURE SENSOR
1. Install the engine coolant temperature sensor through a new gasket.
  
  Fig 1: Remove/Install Engine Coolant Temperature Sensor And Gasket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
2. Connect the engine coolant temperature sensor connector.
  
  Fig 2: Locating Engine Coolant Temperature Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER CASE . Refer to INSTALLATION - Step 64
INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE See step 2
ADD ENGINE COOLANT . Refer to REPLACEMENT - Step 2
INSPECT FOR COOLANT LEAK . Refer to ON-VEHICLE INSPECTION - Step 1
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 93