Fuel Pressure Regulator: Installation: Installation

WARNING: This page is about a different car, the 2012 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.
  
  Fig 1: Locating Fuel Pressure Regulator Assembly O-Rings
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the fuel pressure regulator assembly.
  
  Fig 2: Locating Fuel Pressure Regulator Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL PUMP See step 1
INSTALL FUEL SENDER GAUGE ASSEMBLY See step 1
INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
1. Install the fuel suction tube assembly with pump and gauge to the fuel tank. Refer to INSTALLATION .
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL See step 8
INSPECT FOR FUEL LEAK . Refer to ON-VEHICLE INSPECTION - Step 1